FTTX Drop Products Series
Applications:
Multi-way signal transmission among instruments or communication equipment.
Features:
Bow-type drop cable
Small outer diameter, light weight and low construction cost;
Cold connection technology is adopted for rapid continuity;
The optical cable has high anti-crush resistance and anti-tensile strength, and the self-supporting structure thereof can meet the requirement for span setup below 50m.
Specifically, glass reinforced fiber rod (G-FRP),aramid fiber reinforced rod (K-FRP) or thin steel wire is adopted as the strength,and the optical cable with good softness and good bending property can meet the bending radius requirement;
LSZH or PVC flame-resistant material is adopted to make the optical cable meet the performanse requirements for indoor flame retardant and environment protection;
The insensitive optical fiber which meets the bend loss required by ITU-TG.657A&G.657B standard is adopted, and the minimum bending radius reaches 15mm or even below;
High-carbon steel wire or steel strand is adopted as the suspension wire of the self-supporting rubber-covered optical cable in order to have excellent tensile property;
Round drop cable
Small outer diameter, good flexibility and high strength;
This meets the requirements for outdoor and indoor use;
Round drop cable can be terminated in the field to meet the requirement for rapid access network construction.
Waterproof Drop Cable
Excellent transverse water resistance;
Good mechanical property, environment protection property and flame retardant;
Each unit cable includes independent strength;
Each unit cable can be directly terminated through the standard connectors.
Flat Drop Cable
Good anti-rat and anti-ants proof function;
Small outer diameter and lightweight;
The flat structure is adopted to have more excellent anti-crush resistance; This optical cable can be used together with outdoor junction box;
This optical cable can be existing pipeline resources;
Applicable temperature: -20°C~+60°C;
Environmental protection grade: Comply with EU ROHS standard;
Flame retardant grade: Comply with IEC 60332-1 and IEC60332-3C.
Transmission Performance
Optical Fiber Type | 62.5μm(OM1) | 50μm(OM2) | 50μm(OM3) | SM |
Maximum Attenuation Value (dB/km) | 3.5/1.5 | 3.5/1.5 | 3.5/1.5 | 0.8/0.6 |
Typical Attenuation Value (dB/km) | 3.5/1.5 | 3.0/1.0 | 3.0/1.0 | 0.4/0.3 |
Minimum LED Bandwidth Value (MHz.km) | 200/500 | 500/500 | 1500/500 | — |
Note: other optical fibers can be provided according to user requirements.
Products Overview:
Structurally for GJYFJH(GJFJH\GJYFJCH) [non-self-supporting drop cable (or self-supporting round drop cable with nonmetal strength and LSZH sheath)] optical cable, the jacket material with high bonding strength is directly covered outside the single-mode or multi-mode optical fiber to form the jacketed optical fiber, and the high-strength aramid fiber is adopted as the strength and then is externally extruded with one layer of LSZH sheath. Additionally, the steel strand supporting wire is configured to the self-supporting round drop cable.
Executive Standard:
YDT1258.3-2009 the Series of Indoor Optical Fiber Cables --Part 3: Simplex and Duplex Cable for Use in Premises Cabling
Technical parameters (typical value)
Model | Core Number | Optical Cable Specification(mm) | Tensile Strength | Crush-Resistance(N/100mm) | Minimum Bending Radius(mm) | |||
Short-term | Long-term | Short-term | Long-term | Dynamic | Static | |||
GJFJH | 1 | 2.5 | 150 | 80 | 2200 | 1000 | 20D | 10D |
GJYFJH | 1 | 3.0 | 500 | 250 | 2200 | 1000 | 20D | 10D |
GJYFJCH | 1 | 3.0x5.2 | 600 | 300 | 2200 | 100 | 20D | 10D |
Note:
1. “D” represents the outer diameter of the short shaft;
2. The typical value can be correspondingly adjusted according to actual conditions.
3. The corresponding products can be designed according to client’s special requirements.