RF Remote Optical Cable Series for FTTA Mobile Base
This optical cable is applicable to the access of communication base.
The HD aramid strengthened device ensures the long-term stability of the optical fiber transmission;
Small outer diameter, light weight, flame retardant, easy stripping and flexible;
Convenient construction and maintenance;
Each unit cable has independent strength;
Each unit cable can be directly terminated through standard connectors;
The optical cable with LSZH flame-retardant material meets the requirements for indoor flame resistance and environment protection;
Applicable temperature: -40°C~+80°C;
Environmental protection grade: Comply with EU ROHS standard;
Flame retardant grade:Comply with OFNR specified by UL.
Optical Fiber Type
Maximum Attenuation Value (dB/km)
Typical Attenuation Value (dB/km)
Minimum LED Bandwidth Value (MHz.km)
Note: other optical fibers can be provided according to user requirements.
GYFXJH66 [nonmetal strength, tight layer type, central tube type, LSZH sheath, RF zoom-out optical cable] the structure of optical cable is the tight cover optical cable made from single-mode or multi-mode optical cable coated with high viscosity and strength of tight cover material. Putting tight cover optical cable in the middle of nonmetal aramid fiber reinforced yarn and extruding and packing a layer of LSZH sheath internal shield, wind nonmetal aramid fiber around the internal shield and then extrude and pack a layer of LSZH sheath to make into cable. GYFXH[nonmetal strength, central tube type, LSZH sheath, RF zoom- out optical cable] the structure of optical cable is embed single-mode or multi-mode optical fiber into micro beam tube with LSZH sheath, putting the micro beam tube in the middle of nonmetal aramid fiber reinforced yarn and extruding and packing a layer of LSZH sheath to make into cable.
YD/T2289.1-2011 cable for wireless Remote Radio Unit (RRU) Part Product Structure Chart 1: Optical cable
Technical parameters (typical value)
|Model||Core Number||Optical Cable Specification(mm)||Tensile Strength||Crush-Resistance(N/100mm)||Minimum Bending Radius(mm)|
1. "D" represents the outer diameter of the short shaft.
2. The typical value can be correspondingly adjusted according to actual conditions.
3. The corresponding products can be designed according to client's special requirements.