• 1/1
FLAT MICRO OPTICAL CABLE FOR COMMUNICATION DEVICE USE GSFBU
0571-6375 2888
Parameters
I know
Product details

Consumer Electronic Product Series

Applications:

Transmission line in the equipment.

Features:

It integrates optical fiber and transmission copper wire into a whole, as well as solving broadband access, equipment power utilization and signal transmission,etc.

Small outer diameter, light weight, small occupied space;

Providing various transmission technology, has high adaptability, strong expandibility and wide application.

Providing high-rate data transmission and solves the equipment power utilization problem in network construction.

Applicable temperature: -20°C~+70°C;

Environmental protection grade: Comply with EU ROHS standard;

Flame retardant grade:Comply with IEC 60332-1

Transmission Performance


Optical Fiber Type

62.5μm(OM1)
(850nm/1300nm)

50μm(OM2)
(850nm/1300nm)

50μm(OM3)
(850nm/1300nm)

SM
(1310nm/1550nm)

Maximum Attenuation Value (dB/km)

3.5/1.5

3.5/1.5

3.5/1.5

0.8/0.6

Typical Attenuation Value (dB/km)

3.5/1.5

3.0/1.0

3.0/1.0

0.4/0.3

Minimum LED Bandwidth Value (MHz.km)

200/500

500/500

1500/500


Note: other optical fibers can be provided according to user requirements.


Products Overview:

GSFBU [nonmetal strength, flat optical cable for PU outer sheath] the structure of optical fiber is covering the single-mode or multi-mode optical fiber in the middle of aramid fiber and extruding and manufacturing TPU outer sheath outside aramid fiber.


Executive standard:

YTD 1258.2-2009 indoor optical cable series Terminal optical cable module adopts single-core and dual-core optical cable.


Technical parameters (typical value)


Core NumberOptical Cable Specification(mm)Tensile StrengthCrush-Resistance(N/100mm)Minimum Bending Radius(mm)Optical Cable Weight (kg/km)
Short-termLong-termShort-term Long-termDynamic Static
2(1.2+0.1)x(B.7+0.1)1165050010020D10D



Note:


1. "D" represents the outer diameter of the short shaft;


2. The typical value can be correspondingly adjusted according to actual conditions.


3. The corresponding products can be designed according to client' s special requirements